This will also be an instant overview for which connector types 3D models are I believe you’re a mayor in KiCad’s library management. It probably should be split in 3 (SMT, THT & High Current), to make the size of the PCB fit on a normal piece of paper, so a 1:1 printout can be used as a first shift for connector selection. Now the issue I have is with my build, I brought a Phanteks Enthoo Luxe which has a PWM hub that connects the 3 pre-installed case fans together, this needs a 4-pin header in order to work (I tried to use a 3-pin header and the cable literally smoked and melted R.I. Maybe 5 pins for the high current connectors such as the Phoenix_MC. Current: 7.0 A Circuits: 2 - 24 Pitch: 2. iCrimp SN-28B Dupont Crimping Tool for 3.96mm, 2.54mm, 2.5mm Pitch Dupont, JST XH VH Connectors, AWG 18 to 28. (therefore, using a 10 pin connector as example for each connector type seems logical). Micro-Fit 3.0 Connector Systems, available in multiple circuit sizes and cable lengths for power and signal applications, offer a 2.5mm pitch, a 8.5A maximum current rating and many design options such as a terminal position assurance, blind-mating and compliant pin features. This item: 3-Pin Molex Female Housing 2510 with Pins (10 Pack) 675. I suspect there are some 150 different kinds of connectors in those libraries altogether, and some go from a single pin up to … a lot of pins.įor me it’s sometimes a bit of a struggle to find the right connector in there, and sometimes I think about making a PCB with one connector of each type, and with silk screen text of the library name and/or connector type name.Īn overview like that will give you a quick answer to what all these connectors look like (if they have 3D models), and their relative pitch and size. Molex is not a connector type, but a brand name, and the Molex library has multiple connector types.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |